PVM series EATON Vickers high-pressure oil pump PVM141ER10GS02BYC2320001A0A

1. Compared with other * * *, the rated pressure of PVM pump reaches 31.5Mpa, while others are ≤ 28Mpa, and PVM has a higher load-bearing capacity;

2. The PVM series adopts high-pressure thrust bearings, long-life design, and high reliability;

3. The PVM series comes standard with imported high * * * seals, which are less prone to seal leaks compared to other brands and are suitable for high temperature environments;

4. PVM adopts a droplet shaped design and noise treatment, which eliminates * * * noise;

5. PVM comes with standard displacement adjustment, which can be adjusted according to working conditions;

6. PVM can work continuously and stably at low speeds and can be matched with servo motors for use

PVM has multiple control modes such as constant pressure, load sensitivity, constant power, and remote pressure proportional control. Through standard module switching, it can achieve rapid changes in functionality

Vickers piston pump is a direct axis variable displacement pump with 9 specifications, controlled by pressure and/or other variables. There are various control methods to choose from, providing work flexibility. Or flow compensator. Vickers plunger pumps have low operating noise and can meet today's demanding industrial conditions. The noise level of each pump is close to or lower than the noise of the motor driving the pump. The noise is reduced by the timing configuration of * * *, and this measure also makes the pressure "pulsation" in the output flow very small. This also reduces noise in systems using PVQ plunger pumps.

The Vickers series plunger pump can operate with various types of hydraulic fluids. In addition to typical petroleum based hydraulic oils and synthetic hydraulic oils, it can also adapt to aqueous hydraulic fluids and phosphatidic acid hydraulic fluids.

Vickers plunger pump has a through shaft drive scheme to adapt to multi pump applications and installation needs. The through axis drive pump can be equipped with various types and specifications of quantitative pumps and variable displacement pumps, forming a compact and strain flexible component. The cost of setting up such components is lower because the device size has been reduced and only one mounting seat on the prime mover is required.

Vickers plunger pumps have excellent working characteristics, and the complete range of control methods and installation forms allows for the selection of the most suitable model for any application.

02-334321 PVM045ER05CS02AAA28000000A0A  

411AK00009A PVE210R05AA10A180000F100100CD0A  

02-347309 PVM018ER02AS02AAA28000000A0A  

123AL00370A PVM098ER10GS02AAA28000000A0A  

123AL00889A PVM098ER10GS02AAE0020000EA0A   

2-335172 PVM131ER10GS02AAA28000000A0A    

123AL01587A PVM063ER09GS02AAC23110000A0A  

02-334321 PVM045ER05CS02AAA28000000A0A

123AL01346A PVM045ER06CS04AAA28000000A0A

123AL00457A PVM045ER05CE0200A23000000A0A

123AL00536A PVM081ER09ES02AAA23000000A0A

123AL00561A PVM074ER09GS02AAE0020000AA0A

123AL00565A PVM098ER10GS02AAA2800000EA0A

123AL00576A PVM131ER10GS02AAB2320000EA0A

123AL00652A PVM063ER09EE01AAA07000000A0A

123AL00669A PVM045ER05CE01AAB28110000A0A

123AL00670A PVM074ER10ES02AAB28110000A0A

123AL00671A PVM098ER10GS02AAB28110000A0A